Stopped by the shop today to see how narrowing the rear of the frame and triangulated four link set up was coming. Definite progress. Couldn't get good shots of the bottom of the car as it was on a frame rack.
Pictures I had posted of the body, post blast, disappeared. Needless to say, I was really disappointed after blast. Someone had done a pretty good job of disguising issues with filler and spraying the car with primer just to sell it. I knew it had issues, but not to this level. My father had no idea what to look for when he bought it in 97 and nver dug into it. I got to do all the discovery. Guess I'll repost a couple for reference as this project moves forward.
13" C-4 with 2" drop spindles brake kit arrived. I had asked for the bracket to be painted black, they painted the spindle, but not the bracket...other than that I'm happy with how they look. Didn't break the bank either.
Frame modifications complete. New rear section narrowed and tied into center, provisions for coilovers, triangulated four link added, space for 3" exhaust to run all the way out the back, center section reinforced to reduce flex, and four body mount braces added and extended out to attach at outer floor braces in trying to stiffen everything up. All body mounts will be polyurethane.
Body bolted up to the frame. 4 body mounts added, and the wheel tubs offer an inch on each side of the 335 tires currently on the wheels, so there will be no issues putting 345s on there. 3 inch exhaust tucks nicely everywhere from front to back. Trunk floor and tank mounting will be done by the end of the week.