HemiChallenger71
Well Known Member
Is the siezed 235 or 3 on the tree of any value whatsoever? I was just going to use it as a core for my LS.
Not sure of what he accomplished with thisGot some good suspension ideas at milan today from the only stock suspension x-frame car out there. Metco control arms and a splined sway bar mounted above the axle on the rectangle tube in the pics (hard to see). This car had zero control arm mount bracing and the ENTIRE bottom of the x frame tunnel was cut out for the 1 piece shaft. No frame reinforcements except the center tunnel inside and outside the frame around the drive shaft.
Not the greatest set-up frame wise but I loved the sway bar.
View attachment 29115 View attachment 29116
Brian, It's hard to see, but it is an anti-sway bar similar to the one you use to keep your launch level/straight. You mounted yours in front of the axle and higher up. Yours is a much cleaner set-up in my opinion, but both would work.Not sure of what he accomplished with this