So here's what's done:
-Front suspension rebuilt, 409 springs part #6000
-Rear suspension rebuilt, and added a 4th upper link
using a stock upper setup from a junkyard '64.
Torched the bracket off the housing, flipped it, and
welded it on mine.
-Brakes, stock drums with a dual pot master
-Rearend, stock '61 housing (drain plug
) with a
May '63 case, 3.70's out of a '63 OD car, an Eaton
posi, Aubrey's girdles, and Mark Williams axles.
-All electrical is done. Everything works.
-Body is done. Every hinge, lever, switch, and regulator
was removed, repaired, oiled or greased, and bolted
back in.
-Exhaust
-Fuel system up to the (invisible) pump
Still needs:
-Interior. It's headed for the upholstery shop on
November 7th.
-Cooling system
-Trans, bell, clutch, linkage, and shifter
-Driveshaft
-A 409 engine
Few more pics
This cat obliterates mice. She can stay.