Recent content by pepemotorsports

Hi Everyone Just fired up my 409 for the First time ! ITS ALIVE! Is ít ok not to use a bypass hose On the water pump My 57 Chevy îs a Heater delet car It would be cleaner without any hose Thanks I always apreciate the help i have gotten Paul Pepe Motorsports

Thanks Guys I really appreciate the help!

Hi Guys I'm just wondering what to do with the rear hole in my Offey manifold ? If i run the pcv from the filler tube, with a sealed twist cap. do i run a hose on the back to a catch can , i don't want to have a discharge pipe? This is for my 409 in my 57 150 Thanks Paul

Thanks I always appeciate the help

Hi I just got my Stefs oil pan FOR my 409 to Install in my 57 150 What îs the best găsite to use , I spoke with the company And Theo Said șomeri use a gasket And some don’t Anyone have the best Methotrexatum? Thanks

I'm installing a 409 in my 57 150 Cp, I wanted the engine in the stock position , so I purchased the firewall panels from Williams chassis works Using the stock mounting for the Bell Housing, and bought big block Chevy mounts for the front. I had to refabricate them. I cut and re welded the...

I just picked up a 62 QD block that the machine shop Said it only need honed for standard pistons. The cyl are In perfect shape It was going to be rebuilt over thirty years ago but the bare block was just sitting on the shelf! I Also got a steel crank with it And small port heads The crank has...

Point well taken What is the compression on those type of pistons?

Gotcha ! Thanks

Since it was recently rebuilt, would’t I just need to horn And Install 30 over Pistons ? Thanks

Sorry 63 Block QC Also it’s a 4 speed car If not what would be a nice set of pistons and rods for what I’m using it for Thanks

I’m putting it in a 57 Chevy 456 olds rear Only using it for street cruise Will it be ok? Or should I change the Pistons It has recently been rebuilt. Thanks It’s a t3 block QC Paul

Thanks

I can’t find any other markings on them Thanks Pepemotorsports

Hi , getting ready to purshase a water pump, for my 409. Why would the Edelbrock not be a good choice. I have my stock one , just wanted to go aluminum Thanks Pepemotorsports